Audace Outdoor Edition

Materials & Performance

From 316L stainless steel and advanced protective finishes to solution-dyed textiles, every material in Audace Outdoor Edition is selected and treated for life outside.

Engineered from the Core

Audace Outdoor Edition combines 316L stainless steel and aluminum, using each material where its properties best serve the design. Together, they provide the strength, durability and versatility required for outdoor use while preserving the collection's precise, lightweight forms.

Engineering and metalwork at the YLA atelier

316L Stainless Steel

Frames and legs are made from 316L stainless steel, selected for its durability and corrosion resistance in chloride-rich and coastal environments. Its low carbon content helps maintain corrosion resistance around welded areas, while molybdenum provides added resistance to chloride-induced pitting.

316L

Stainless steel

Corrosion resistant

Suited to coastal environments

MIG welded

Using matching 316L filler

Aluminum

Aluminum 3003 H14 is used for elements including tabletops, shelves and seating plates, where its combination of lower weight and formability allows the metal to take on Audace's precise folded forms.

3003 H14

Aluminum alloy

Lightweight

For reduced component weight

Formable

Suited to folded forms

Protection, Layer by Layer

Outdoor performance depends not only on the metal itself, but on how its surface is prepared and protected. Every Audace Outdoor Edition metal component passes through a controlled preparation and finishing process before receiving YLA's characteristic matte finish.


  1. 01

    Mechanical preparation

    The metal surface is mechanically prepared before treatment.


  2. 02

    Cleaning & degreasing

    A chemical cleaning process removes contaminants and prepares the surface for conversion treatment.


  3. 03

    Oxsilan conversion coating

    A chrome-free Oxsilan conversion coating prepares and protects the metal surface before powder coating.


  4. 04

    Electrostatic powder coating

    Polyester powder formulated for exterior use is electrostatically applied to create an even, durable layer of color.


  5. 05

    Oven curing

    The finish is cured at approximately 200°C for 15–20 minutes, producing a hard surface that is resistant to moisture and designed for exterior use.

Additional Surface Protection

Audace Outdoor Edition tabletops are protected with ULTRAFIT XP RETRO MATTE, a hydrophobic polyurethane film with Nano Ceramic Technology applied over the powder-coated surface. Its multilayer construction combines UV protection, a self-healing TPU layer and impact resistance, while its matte surface helps repel dust and liquids.

  • 8 mil film
    thickness
  • Self-healing
    TPU layer
  • 90 ± 10° water
    contact angle
  • Passes
    gravelometer
    testing
    ASTM D3170
  • Color change below
    1 after 1,000 hours
    of outdoor
    weathering
    ASTM G154 / G155
Audace Outdoor Edition fabric swatch mosaic

Performance Woven In

Audace Outdoor Edition uses solution-dyed performance fabrics designed for the demands of outdoor living. Because color runs through the fiber rather than sitting only on its surface, the textiles achieve high levels of color fastness.

Stain protection is built into the fiber rather than applied as an after-treatment. The fabrics are also water repellent and resistant to mold, mildew and humidity-related odors, combining outdoor performance with the comfort expected from an upholstered collection.

35,000–50,000*

Martindale abrasion resistance

UV 7–8 / 8 to 8 / 8*

Color fastness

  • Water repellent
  • Stain resistant
  • PFAS-free
  • Mold & mildew resistant
  • OEKO-TEX® STANDARD 100

* Performance ratings vary depending on the selected fabric.

Made to Last.
Simple to Care For.

Regular cleaning and a few preventive measures help preserve the appearance and performance of Audace Outdoor Edition over time.

Metal & Finish

Clean metal surfaces with fresh water and a mild liquid detergent using a microfiber cloth or soft sponge. In coastal environments, rinse more frequently to remove airborne salt, paying particular attention to joints, fixings and undersides.

Avoid abrasive cleaners and materials, aggressive chemicals, solvents, pressure washers and protective coatings or touch-up paints not specified by YLA.

Fabrics & Cushions

Most everyday stains can be cleaned using water, a microfiber cloth and white paper towel. Cushions should be allowed to air dry completely before being stored or covered.

During extended periods of non-use, wet seasons, storms or sandstorms, store cushions in a dry, ventilated space.

Materials in Service of Design

Every material and protective layer has a purpose: allowing the clarity, color and sculptural character of Audace to move confidently outdoors.